Skip to content
Fuel Explainer

What Is HVO Fuel? Renewable Diesel's Other Name, Explained

HVO and renewable diesel are the same fuel under two names. Europe names it after the process. The U.S. names it after the renewable share on the label. Here's what each name, spec and label means, and how to check what's going into your tank.

HVOHydrotreated vegetable oil
EN 15940Europe's spec
ASTM D975U.S. diesel spec
70–85Cetane (DOE)
R99 delivered nationwide
Tank wagon or transport loads
24/7/365 dispatch
800-720-4546
Quick Answer

HVO stands for hydrotreated vegetable oil: fats and oils reacted with hydrogen to make paraffinic diesel. It's the same fuel the U.S. calls renewable diesel. In Europe, neat HVO is sold as HVO100 under the EN 15940 paraffinic diesel spec. In the U.S. it's sold as R99 or R100 under ASTM D975, the ordinary diesel spec.

Rear view of a silver fuel tank trailer on a two-lane road through green farm fields under a blue sky
HVO and petroleum diesel move in the same trucks and tanks. On a load ticket the only clue may be the product name, so it pays to know what the labels mean.
The name

What does HVO stand for?

HVO stands for hydrotreated vegetable oil, sometimes written hydrogenated vegetable oil. Neste's renewable diesel handbook says the name dates from the years when vegetable oils were the only feedstock. Today much of it is made from waste and residue fats from food, fish and slaughterhouse industries, so Neste calls the name "no longer accurate." It stuck anyway, because European regulations, fuel standards and carmakers' fuel recommendations already used it. Neste also notes that chemists prefer "hydrotreated," since "hydrogenated" is usually linked to making margarine.

Whatever the label says, the fuel is hydrocarbons, not oil. HVO is a mix of straight-chain and branched paraffins, typically 15 to 18 carbon atoms long. It has practically no aromatics, no sulfur to speak of and no oxygen. That's why it behaves like diesel and not like biodiesel or vegetable oil.

You'll run into a lot of names for the same product:

NameWhere you'll see itWhat it refers to
HVOEurope, engine maker approvalsHydrotreated vegetable oil, the process-based name
Renewable dieselU.S. agencies, suppliers, federal tax codeDiesel made from biomass that meets the diesel spec
R99, R100, R20U.S. pumps, bills of lading, quotesRenewable diesel by percentage: R100 is neat, R20 is 20% (OPIS)
HVO100European filling stations100% HVO, sold under EN 15940
HDRD, HEFAEIA and industry reportsHydrogenation-derived renewable diesel; hydroprocessed esters and fatty acids (EIA)
Paraffinic diesel, XTLEN 15940, European pump labelsThe fuel family HVO belongs to, which also includes synthetic GTL and BTL diesel
Green dieselOlder U.S. usage, product and plant namesUsually renewable diesel; see red vs. green diesel

Sources: Neste Renewable Diesel Handbook (2016); EIA, Biofuels explained; OPIS glossary; CEN fuel labels. Neste also lists HBD, non-ester renewable diesel and renewable hydrocarbon diesel as names used in North America and Asia.

The process

How hydrotreating turns fats and oils into HVO

Hydrotreating is an oil-refining process applied to fats and oils. The DOE describes it as reacting the feedstock with hydrogen at elevated temperature and pressure over a catalyst. At a high level, it runs in four steps:

  1. Start with triglycerides. Vegetable oils, animal fats and used cooking oil are mostly triglycerides, molecules built around three fatty acid chains (Neste).
  2. Hydrotreat. Hydrogen strips the oxygen out of the molecule and splits it into three separate chains, leaving straight-chain hydrocarbons similar to the ones already in diesel (Neste).
  3. Isomerize. A second unit turns some of those straight chains into branched ones. That improves cold-flow properties, and it's how producers make winter and even arctic grades (Neste).
  4. Separate the products. The main product is diesel. Neste lists propane, renewable gasoline components and isoalkanes as side products, and says the same process can make renewable jet fuel.

Biodiesel starts from the same oils but takes a different route: the oil reacts with methanol and keeps its oxygen as a methyl ester. That's why biodiesel gets blended and HVO can run neat. The full side-by-side, including energy use and carbon, is in renewable diesel vs. biodiesel. For how petroleum diesel is refined, see how diesel is made from crude oil.

HVO is not straight vegetable oil

The "vegetable oil" in the name describes the starting material. Raw or used cooking oil that hasn't been hydrotreated or made into biodiesel isn't diesel fuel, and it doesn't meet EN 15940 or ASTM D975.

Europe vs. U.S.

Why Europe says HVO and the U.S. says renewable diesel

Europe kept the process name. "HVO" is written into European regulation, fuel standards and carmaker fuel guidance, so that's what the market calls it (Neste). The formal standard term is "paraffinic diesel fuel from hydrotreatment," and the pump label is XTL, the EN 16942 identifier for paraffinic diesel whose quality is set by EN 15940 (CEN). Neat HVO at a European pump is usually advertised as HVO100.

One catch: Europe's regular diesel spec, EN 590, allows HVO to be blended in with no limit and no pump label, as long as the finished fuel still meets the density minimum (Neste). So ordinary B7 diesel in Europe can already contain some HVO without saying so.

The U.S. named the fuel, then the blend. EIA calls it renewable diesel, or more formally hydrogenation-derived renewable diesel (HDRD) or hydroprocessed esters and fatty acids (HEFA). The federal tax code defines renewable diesel as liquid fuel derived from biomass that meets ASTM D975 or D396, and excludes fuel made by co-processing biomass with a non-biomass feedstock (26 U.S.C. 40A(f)(3)). The market then borrowed biodiesel's naming habit and puts the renewable percentage on the label: R100, R99, R95, R20.

So "HVO" tells you how the fuel was made. "R99" tells you how much of it is in the tank. Many U.S. suppliers use both, and FuelGo's R99 renewable diesel page lists HVO, R99, R100 and renewable diesel as names for the same product.

Specs

EN 15940 vs. ASTM D975: the specs behind the names

HVO fails Europe's regular diesel spec on a single property: density. The DOE and Neste both say it meets EN 590 in every other respect but sits below its 820 kg/m³ minimum for temperate grades. Europe solved that with a separate standard for paraffinic fuels, EN 15940. The U.S. diesel spec, ASTM D975, has no density limit, so in the U.S. renewable diesel is simply No. 2-D diesel and blends with petroleum diesel in any ratio (Neste, EIA).

PropertyEN 15940 (Class A)EN 590 (Europe)ASTM D975 No. 2-D S15 (U.S.)
CoversParaffinic diesel: HVO, GTL, BTLRegular diesel (B7)U.S. diesel, petroleum or renewable
Density at 15°C765–800 kg/m³820–845 kg/m³ (temperate grades)No limit
Cetane number, min.705140
Sulfur, max.5 mg/kg10 mg/kg15 ppm
FAME (biodiesel), max.7%7%5% (B5)

Sources: Neste Renewable Diesel Handbook (2016), Table 1, comparing EN 15940:2016, EN 590:2013 and ASTM D975-15b; DieselNet, EU fuel standards. Editions change and sources differ on detail: DieselNet's extract lists a Class A cetane minimum of 71 and Class B at 51 with density 780–810 kg/m³. Buy to the current edition named on your contract.

EN 15940 also caps total aromatics at 1.1% by mass. Neste explains why: there's no practical test for paraffin content, so the standard proves a fuel is paraffinic by limiting aromatics to practically zero.

Two practical points. First, the low density is why HVO carries about 4% less energy per gallon even though it carries more per pound; the DOE puts renewable diesel at 123,710 Btu a gallon against 128,488 for ULSD. Second, many engine and generator approvals were written against EN 15940, while U.S. product ships as D975. If your approval names one spec, ask which one your supplier certifies to. That's covered in more detail in renewable diesel for generators.

Feedstocks

What HVO is made from

Despite the name, today's HVO isn't only vegetable oil. The DOE lists fats, oils and greases, including used cooking oil, as the main source, with soybean and canola oil as examples. Neste says a growing share comes from waste and residue fats and non-food vegetable oil fractions.

Crop oils

Soybean, canola, corn oil

Soybean oil was the largest U.S. biofuel feedstock in July 2026. Canola and distillers corn oil are also major inputs.

Animal fats

Tallow and white grease

Rendered fats from meat processing. This is why the "vegetable oil" in HVO is no longer literally true.

Used oils

Yellow grease and used cooking oil

Used cooking oil is counted under yellow grease in EIA feedstock data.

Why it matters

Feedstock sets the carbon score

Waste fats score lower than crop oils. Argonne found 79–86% lower lifecycle emissions from tallow, used cooking oil and distillers corn oil, and 40–69% from soybean, canola and carinata oil.

The current U.S. mix. In July 2026, U.S. plants used a record 4.05 billion pounds of fats and oils to make biodiesel, renewable diesel and sustainable aviation fuel, according to EIA data reported by Argus. Soybean oil led at 1.69 billion pounds, or 54.4 million pounds a day. Tallow followed at 24.9 million pounds a day, then yellow grease at 19.7 million, distillers corn oil at 14.6 million and canola oil at 10.6 million. Those totals cover all three fuels, not renewable diesel alone.

For carbon reporting, the feedstock is what moves the number. The DOE puts renewable diesel at about 65% lower carbon intensity than petroleum diesel on average, from California's certified values, and Argonne's study puts the range at roughly 40–86% depending on feedstock. How to compare that with biodiesel is in carbon intensity of both fuels.

Labels

What R99, R100, HVO100 and XTL mean on a label

LabelRegionWhat's in it
R100U.S.Neat renewable diesel, no petroleum diesel (OPIS).
R99U.S.About 99% renewable diesel with a small share of petroleum diesel. The most common U.S. grade.
R95, R50, R20U.S.Blends: the number is the renewable diesel percentage. GM has approved R-95 and R-99 for its 2006–2022 diesels; OPIS uses R20 for a 20% blend.
HVO100Europe100% HVO, meeting EN 15940.
XTLEU pump labelParaffinic diesel to EN 15940. Covers HVO and synthetic fuels such as GTL; the label alone doesn't say which.
B7, B10, B20EU pump labelBiodiesel (FAME) content, not HVO. B7 diesel can still contain unlabeled HVO.
B5, B20U.S.Biodiesel blends. Not renewable diesel. See biodiesel vs. diesel.

Sources: OPIS glossary; GM TechLink (June 2022); CEN fuel labels (EN 16942); Neste Renewable Diesel Handbook; trans.info (HVO100 meets DIN EN 15940).

Why R99 and not R100? Sources disagree on why the small petroleum share persists, and we couldn't confirm a single reason from a primary source. One documented reason: the federal $1-a-gallon blender's credit applied to renewable diesel blended into a mixture containing at least 0.1% diesel fuel. That credit expired after 2024 (DOE AFDC) and was replaced by the section 45Z producer credit. For anyone buying fuel, R99 and R100 run the same: both meet D975 and both are HVO.

Not tax advice

Tax credits for renewable diesel are earned upstream by producers and blenders, not claimed by a business buying finished fuel, and the rules change. More context is in what drives the cost of each fuel. Check current rules with a tax professional.

Verify the product

How to tell if HVO is what you're buying

The routine lab test for biodiesel content won't find HVO. Neste notes that the European FAME test, EN 14078, works only on FAME. Since HVO is the same kind of hydrocarbon found in fossil diesel, the renewable share is normally proven by paperwork. Check these:

  1. Read the product line. The bill of lading and invoice should name the product and blend: R99, R100 or a stated renewable diesel percentage. A "B" number is biodiesel, not HVO.
  2. Ask which spec it's certified to. ASTM D975 in the U.S. If your engine approval names EN 15940, ask whether the product is certified to it.
  3. Look at density on the certificate of analysis. Neat HVO runs about 765–800 kg/m³ at 15°C, roughly 6.4–6.7 lb per gallon. Petroleum diesel is heavier. Neste notes that when both components are known, a blend's density shows roughly how much renewable diesel is in it. Weights are in how much diesel weighs per gallon.
  4. Check cetane. The DOE puts renewable diesel at 70–85 against 40–55 for petroleum diesel. A product sold as neat HVO with a cetane in the 40s doesn't match those figures.
  5. Ask how it was made. Fuel co-processed with petroleum in a refinery unit is excluded from the federal renewable diesel definition (26 U.S.C. 40A(f)(3)). Ask whether the product is from a standalone renewable diesel plant.
  6. Keep the documents with each load. Product, percentage, spec and carbon intensity basis. If a claim is ever disputed, Neste says a carbon-14 test (ASTM D6866) can measure the bio-based share, but it's laborious and not routine. What to keep for carbon reporting is in carbon reporting for renewable diesel.
On site

What changes when you switch to HVO

Not much, which is the point of a drop-in fuel. The differences worth planning for are covered in our other guides:

FuelGo

R99 renewable diesel, delivered

FuelGo delivers R99 renewable diesel, the same fuel Europe calls HVO, nationwide as a drop-in replacement for petroleum diesel, with sustainability documentation for your ESG reporting. R99 isn't stocked at every terminal. Where we can pull it locally, it moves like any other load. Where there's no local terminal, we bring it in by rail or barge, and dispatch confirms the supply route and lead time for your site before we quote. Need neat renewable diesel (R100/HVO100) instead of R99? That depends on terminal supply and availability, and we can source it locally where it's needed. Ask dispatch what's available in your area.

We deliver tank wagon drops of 20 to 4,400 gallons and transport loads up to 7,500 gallons, into site tanks and generators. Switching an old tank? Lab fuel testing, fuel polishing and tank cleaning get it ready for the first load. Dispatch runs 24/7/365. Get a delivered quote or call 800-720-4546; a dispatcher replies within the hour.

Common questions

HVO fuel FAQ

What does HVO stand for?
HVO stands for hydrotreated vegetable oil, sometimes written hydrogenated vegetable oil. The name comes from the process: fats and oils are reacted with hydrogen over a catalyst to make paraffinic diesel. Neste notes the name is no longer accurate, because much HVO is now made from waste fats rather than vegetable oil, but it stuck because European rules and fuel standards use it.
Is HVO the same as renewable diesel?
Yes. HVO is the European name and renewable diesel is the U.S. name for the same hydrotreated fuel. EIA also calls it hydrogenation-derived renewable diesel (HDRD) or hydroprocessed esters and fatty acids (HEFA). In the U.S. it is usually sold by blend level, as R99 or R100.
What is HVO100?
HVO100 is 100% HVO, sold neat rather than blended into regular diesel. In Europe it is sold at filling stations under EN 15940, the standard for paraffinic diesel, and the pump label is XTL. The closest U.S. equivalent is R100.
What is the difference between HVO and R99?
HVO names the fuel and the process; R99 names the blend. R99 is about 99% renewable diesel, which is HVO, with a small share of petroleum diesel, and it is the most common U.S. grade. R100 is neat. Both meet ASTM D975 and run as drop-in diesel.
Is HVO the same as biodiesel?
No. Biodiesel (FAME) is made by reacting oils with methanol and keeps oxygen in the molecule, so it is sold in blends such as B5 and B20. HVO is hydrotreated into hydrocarbons like those in petroleum diesel, so it meets the diesel spec on its own. The full comparison is in our renewable diesel vs. biodiesel guide.
What is HVO made from?
Fats, oils and greases. The DOE lists soybean and canola oil and used cooking oil; Neste says a growing share is waste and residue fats from food and meat processing. In July 2026, soybean oil was the largest U.S. feedstock for biodiesel, renewable diesel and sustainable aviation fuel combined, followed by tallow, yellow grease, distillers corn oil and canola oil (EIA data via Argus).
Which spec does HVO meet, EN 15940 or ASTM D975?
Both, depending on the market. In Europe HVO meets EN 15940 for paraffinic diesel; it misses the regular EN 590 spec only because its density is below the minimum. In the U.S. it meets ASTM D975 as No. 2-D diesel, which has no density limit. If an engine approval names EN 15940, ask your supplier which spec the product is certified to.
How can I tell if fuel is really HVO?
Mostly from the paperwork. Routine biodiesel tests cannot detect HVO, so check that the bill of lading names the product and blend (R99, R100 or a stated percentage), ask which spec it is certified to, and look at the certificate of analysis: neat HVO has a density of about 765–800 kg/m³ and a cetane number of 70 or more. A carbon-14 test (ASTM D6866) can confirm the bio-based share if a claim is disputed.

Sources: Neste Renewable Diesel Handbook (May 2016) (meaning and history of "HVO"; hydrotreated vs hydrogenated; other names; process, isomerization and side products; C15–C18 paraffins; EN 15940/EN 590/D975 table; EN 590 allows unlabeled HVO; XTL; EN 14078 and carbon-14; density and blend share) · DOE AFDC, Renewable diesel (hydrotreating with hydrogen, heat, pressure and catalyst; feedstocks; meets D975 and EN 15940, not EN 590 density; 65% average lower carbon intensity) · DOE AFDC, Fuel Properties Comparison (cetane 70–85 vs 40–55; 123,710 vs 128,488 Btu/gal; main source fats, oils and greases) · EIA, Biofuels explained: biodiesel, renewable diesel and other biofuels (updated Feb. 2024) (HDRD and HEFA; chemically equivalent to petroleum diesel; meets D975) · DieselNet, EU fuel standards (EN 15940 Class A/B cetane and density; up to 7% FAME; EN 590 density by grade) · Crown Oil, BS EN 15940 specification (supplier spec table (cetane 70 min.), showing how sources quote the standard differently) · CEN-CENELEC, European fuel labels (EN 16942) (XTL label for paraffinic diesel per EN 15940; B7/B10 diesel labels) · trans.iNFO, Was bedeutet die Zulassung von HVO100 in Deutschland (2023) (HVO100 meets DIN EN 15940) · Quantum Commodity Intelligence, Orlen begins sales of HVO100 in Germany (Oct. 2024) (HVO100 = 100% HVO sold at filling stations) · OPIS glossary, Renewable Diesel (R99) (R100 neat, R20 = 20% blend; green diesel naming) · GM TechLink, Using R-99 or R-95 Diesel Fuel (June 2022) (R-99/R-95 labels; approval for 2006–2022 GM diesels) · DOE AFDC, Biodiesel Mixture Excise Tax Credit (expired) (mixture with at least 0.1% diesel fuel; expired Jan. 1, 2025) · 26 U.S.C. 40A(f)(3) (federal renewable diesel definition; co-processing exclusion) · Argus, US renewable feedstocks demand sets another record (Sept. 30, 2026) (July 2026 EIA feedstock data) · Xu et al., Environ. Sci. Technol. 2022 (Argonne) (lifecycle reductions by feedstock)